How to Troubleshoot Your Brakes

Co-authored by Duston Maynes

Last Updated: June 28, 2022 References

The brake system is the most important safety feature of your vehicle. Unfortunately, there are many things that can go wrong with your brakes. All these problems require immediate attention, but first you have to find out exactly what's going on with your brakes. If you hear a screeching, metallic sound when you apply your brakes, the pads are probably wearing out and need replacement. If your brake pedal feels soft and doesn't stop the car right away, you may have a fluid leak or air in the brake system. Finally, if your pedal feels too stiff, the vacuum booster could be failing. If you discover any of these problems, take your car to a mechanic as soon as possible to have them fixed.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Method 1

Method 1 of 4:

Fixing Noisy Brake Pads

Download Article

A bit of screeching in your brake pedals is normal and usually nothing to worry about. It is common in the morning when your car is still warming up, or if there was recently some rainy weather and the pads are wet. Drive around your neighborhood slowly and brake normally. If the noise goes away after a few minutes, then your brake pads were still just warming up.^{[1]
X
Research source}
2
Inspect the brake pads if the sound continues after the car warms up. Brake pads are designed to start screeching or squealing when they’re worn down as metal presses against metal.^{[2]
X
Expert Source

Duston Maynes
Automotive Repair Specialist

Expert Interview. 23 June 2021.} If the car has warmed up and you still hear a screeching noise, then you probably need new brake pads.^{[3]
X
Research source}
- The sound when your brake pads need replacing is also different from normal warming up noises. A metallic grinding noise indicates worn out brake pads.^{[4]
  X
  Expert Source
  
  Ed Beery
  Automotive Specialist
  
  Expert Interview. 19 November 2021.}
- You probably won’t notice much trouble stopping even if your brake pads are very worn down, so don’t rely on this as an indicator on whether you need new brakes or not. The grinding metallic sound is the indicator.
Advertisement
3
Replace your rear brakes if the pads squeal when you apply the e-brake. Even if you know that the brake pads need replacement, you may not be able to tell which ones are going bad. For a quick trick, isolate your rear brakes. Drive slowly, around 15 mph, and apply your e-brake. Since the e-brake only triggers the back brakes, screeching indicates that the back brakes are the ones that need work.^{[5]
X
Research source}
- Make sure no cars are behind you when you do this experiment.
- Remember that this trick only tells you if the rear brakes need work, but doesn’t tell you if the front ones are worn out too. If you replace your back brakes and still hear screeching, then the front ones need work as well.
4
Install new brake pads to stop the screeching. Once you’ve confirmed that the brake pads need replacement, install new pads to fix the problem. Either take the car to a mechanic, or if you know how to, replace the pads yourself.^{[6]
X
Research source}
- Remember to get pads that fit your vehicle. Check your owner’s manual if you aren’t sure what kind of brake pads your car uses.
- Drive around and apply your brakes. The screeching should stop after the pad replacement. If you still notice brake problems, take the car to a mechanic for an inspection.

Method 2

Method 2 of 4:

Finding the Source of Soft Brakes

Download Article

1
Check your brake fluid if the pedal feels squishy. A squishy or soft brake pedal means that you can press the pedal further than you should be able to or even all the way down to the floor. The car may take longer to stop as well. This usually means that there is a problem with the hydraulic brake system. The 2 most common causes for this are a leak in the brake line and air in the system.^{[7]
X
Expert Source

Ed Beery
Automotive Specialist

Expert Interview. 19 November 2021.} Investigate further to locate the issue.^{[8]
X
Research source}
- Don't drive the car with a squishy brake pedal. This is an urgent problem.
- If you suddenly notice your brake pedal go soft while you’re driving, pull over immediately. This could indicate a ruptured brake line or similar failure of the brake system.
2
Open the hood and check the fluid level. First check if you have enough brake fluid in the system.^{[9]
X
Expert Source

Ed Beery
Automotive Specialist

Expert Interview. 19 November 2021.} Open your hood and find the master cylinder reservoir, which is where the brake fluid is stored. This is a white tank on top of a metal tube, usually located towards the back of the engine bay on the driver’s side. Open the cap and see if the brake fluid reaches the fill line.^{[10]
X
Research source}
- Park your car on a level surface to get an accurate brake level reading.
- If you can’t find the master cylinder, check your car owner’s manual for a diagram.
- If your car was recently running, parts under the hood will be hot. Don’t touch anything except the master cylinder to avoid burns.
3
Refill the brake fluid if its level is low. If your brake fluid level is below the fill line, add new fluid. Most cars use DOT 3 or DOT 4 fluid. Fill the master cylinder reservoir up to the fill line and replace the cap.^{[11]
X
Research source}
- If you aren’t sure what type of brake fluid your car uses, consult your owner’s manual.
4
Pump the brakes with the car off. Get into the driver’s seat and start pumping your brakes to see if there is any improvement. If they feel better, the problem was probably low brake fluid. But continue searching to find the cause of the low fluid. Pumping the brakes pushes fluid into the hydraulic system and reveals any potential leaks.^{[12]
X
Research source}
- You could turn the car on for this step, but this causes the liquid to expand. If you have a leak, liquid may spill out quickly.
5
Check the brake lines for any leaking fluid. If you have a leak in your brake lines, fluid will seep out when you press the brakes. After pumping the brakes a few times, start searching for leaks. Brake fluid is light gold in color. If you see liquid like this under your hood, around or under your car, or in the car, it indicates a brake leak.^{[13]
X
Research source}
- First look under the hood. Check the housing around the master cylinder for leaking fluid.
- Follow the brake line out of the master cylinder and into the hood of the car. Do a visual check for any fluid coming out.
- Then check for drips or pools underneath the car. Look especially around the insides of the tires. Fluid sometimes runs down the tires if there’s a leak.^{[14]
  X
  Expert Source
  
  Ed Beery
  Automotive Specialist
  
  Expert Interview. 19 November 2021.}
- Also look inside the car, just behind the brake pedal. Sometimes fluid leaks here.
6
Have the car fixed immediately if you have a brake fluid leak. If you see brake fluid leaking, this is a serious problem that has to be fixed immediately. If you know how, fix the leak yourself. Otherwise, get the car to a mechanic as soon as possible.^{[15]
X
Research source}
- If the leak is coming from the master cylinder, replace it promptly.
- Do not drive a car with a brake fluid leak to a mechanic. You could lose your brakes completely on the way. Call a tow truck instead.
- Avoid driving the car at all until the leak is fixed.
7
Bleed the brake system if the pedal is soft and there is no leak. If you don’t find a brake fluid leak, then there is probably air in the brake system. It also inhibits brake performance. Bleed air out of the system to improve your performance.^{[16]
X
Research source}
- The bleeding process includes pumping the brakes, jacking the car up, and releasing the bleed valve on each tire's brakes. Follow each step carefully to complete the procedure.
- The tires need to be bled in a specific order. Check your owner’s manual for the correct bleeding order.

Method 3

Method 3 of 4:

Dealing with a Hard Brake Pedal

Download Article

The vacuum booster is another component of the brake system that’s housed under the hood. A faulty or malfunctioning booster is the primary cause of a hard break pedal. If you feel like you can’t push your pedal down very far or the pedal feels too stiff, the vacuum booster is probably behind it. Test the pedal out to see if the booster is working.^{[17]
X
Research source}
2
Pump the brakes a few times with the engine off. Get into the driver’s seat and don’t turn the car on. Pump the brake pedal 5-10 times. You’ll notice the pedal start stiffening up. Keep pressing until you can’t push the pedal down much anymore.^{[18]
X
Research source}
- Don’t force the brake pedal down. Press it normally. When you can’t press it down with normal pressure anymore, then this step is complete.
When you can’t move the pedal anymore, press down on it with normal pressure. Then start the car while pressing down. If the pedal releases and pulls back down, then the vacuum booster is working normally. If not, then the booster probably needs to be replaced.^{[19]
X
Research source}
4
Replace the brake vacuum booster if it isn’t working properly. If the pedal doesn’t loosen up after you start the car, then the brake booster is failing. If you know how to, replace the booster yourself. Get a replacement from an auto parts store, remove the old booster, and install the new one. Otherwise, bring your car to a mechanic to have the booster replaced professionally.^{[20]
X
Research source}
- In most cars, the master cylinder blocks the vacuum booster. Remove this first.
- Go inside your car and tilt your steeling wheel all the way up and remove the car's knee blocker. Reach inside and detach the clip connecting your brake pedal to the vacuum booster. Unscrew the 4 bolts holding the booster down from inside the car, then go back under the hood and remove the hoses connected to the booster. Slowly slide it out of position.
- Slide the new booster in and hook the hoses into it. Then go inside the car, tighten the nuts, and reconnect the brake pedal. Put the steering wheel and knee blocker back into position.
- Don’t try to drive the car until the booster is fixed. Call a tow truck to bring it to the mechanic.

Method 4

Method 4 of 4:

Diagnosing Other Issues

Download Article

1
Replace the brake shoes if your drum brakes are screeching. Brake shoes are similar to brake pads, except shoes are on drum-style brakes. The signs that shoes need replacing are the same as when pads need replacing. Usually the shoes make a screeching, metallic sound to indicate they're worn down. Take the car to a mechanic to have the shoes replaced, or do it yourself if you know how.^{[21]
X
Research source}
- Worn-out brake shoes may also pull the car to one side when you press the pedal down.
2
Get new brake calipers if your brake pads show uneven wear.^{[22]
X
Expert Source

Duston Maynes
Automotive Repair Specialist

Expert Interview. 23 June 2021.} If your brake pads are all worn-down on one side but look new on the other, then the likely culprit is your caliper. An old caliper leans to the side and puts uneven pressure on the pads. Eventually, this reduces the brake effectiveness. If you see uneven wear on your brake pads, have your calipers replaced.^{[23]
X
Research source}
- Fluid sometimes leaks from worn-out calipers as well. This could cause a brake fluid leak.
- Replacing brake calipers is a big job. If you don't think you have enough skill to do it yourself, let a professional do the job.
3
Install new brake rotors if your car wobbles while it's stopping. The brake rotors are the areas that pads press against. When the rotor is worn-out, its shape warps and the pads press down unevenly. This results in shaking and wobbling when you press the pedal down. If you've noticed the problem, you may need new rotors.^{[24]
X
Research source}
- If the rotors are bad, the car will shake at any speed when you hit the brakes.
- The shaking will also happen consistently when you hit the brakes. If it only happened once, you may have been on uneven ground.

Expert Q&A

Search

Add New Question

Question

Why does my car pull to the right when I hit the brakes?

Ed Beery
Automotive Specialist
Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.

Ed Beery

Automotive Specialist

Expert Answer

This may be caused by poor brake adjustment or uneven brake fluid pressure in the system.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

What can cause a vehicle to pull in one direction?

Ed Beery
Automotive Specialist
Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.

Ed Beery

Automotive Specialist

Expert Answer

This may be caused by a caliper not releasing, a pad binding, or an issue with an emergency brake not releasing.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1
Question

Why does my steering wheel shudder when I brake?

Ed Beery
Automotive Specialist
Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.

Ed Beery

Automotive Specialist

Expert Answer

This can indicate warped or torn rotors or unevenly worn brake pads. Extremely hot rotors can cause warping, while inconsistent pad wear may be caused by poor installation, bad retention springs, or issues with the brake calipers.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Never delay in getting your car's brakes fixed. You could suddenly lose your brakes and get into a car accident.

Thanks
Helpful 2 Not Helpful 0
Be very careful with brake fluid, as it will strip off your car's paint incredibly easily. If any fluid gets on your paint, flush it off with water as soon as possible.

Thanks
Helpful 1 Not Helpful 0
Always wear gloves and goggles when working on your car.

Thanks
Helpful 1 Not Helpful 0